|
ALFA
SILICONE SPRAY is a formulation of silicone fluid,
propellants and additives on spraying, the silicone fluid is
deposited on the surface to which it is applied & the propellant
( solvent if added ) vaporises. The thin film of silicone fluid is
serviceable from -40oC to + 230oC. |
| TYPICAL
PROPERTIES : |
| TEST |
RESULT |
| COLOR |
TRANSPARENT |
| TEMPERATURE
RANGE |
-40oC
to + 230oC |
| HOT
WATER BATH |
PASSED |
| FLAMMABLE |
HIGHLY |
| VOLUME |
550
ML |
|
| HOW
TO USE : |
| Spray
a thin layer over the mould from a distance of 25 cm to 30
cm. A single application is enough to yield several
releases. |
| ADVANTAGES
: |
| Most
economical to use upto a number of cycles per application
depending on mould contour and the type of raw material
used. The spray is crystal clear, non toxic, non sticky
& non staining. Easy to apply & safe to use. It
forms a thin layer & can reach interior portions of
intricate moulds. t contains a very versatile grade of
silicone fluid, saves precious time. |
| FEATURES
: |
- Mould
Release Agent.
- Reduces
Rejection.
- Prevent
sticking.
- Inert
& Colorless.
- Heat
Resistance.
|
| CAUTION
: |
| Do
not spray on or near naked flame or any other source of
ignition, as contents are highly flammable. It is a pressurized
container, do not drop, puncture or expose to
temperature above 55oC. Do not spray into eyes, mocous
membrances & body, in case of accident wash eyes with
clean water. |